Waste Cone with Flow Visor – Class 300Lbs

Waste Cone with Flow Visor - Class 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs
Waste Cone com Visor de Fluxo - Classe 300Lbs

Product description

Waste Cone with sight glass – Class 300 Pounds – Germek

Waste cone made of FoFo cast iron with aluminum flow sight glass. It must be installed through its inlet flange immediately after the relief valve so that it is possible to see the excess flow from the relief valve system. This surplus fluid is sent back to the reservoir via the return or test pipe.

Manufactured to meet the pressure class of 300 Pounds, it has versions of the ANSI B 16.5 flanges in flat face (FF) and raised face (RF).

Its constructive form corresponds to table 4.26 of NFPA-20 below:

Tabela NFPA

Additional information

Pressure Class 300Lbs/PSI
Nominal Pump Flow (Pump GPM) 25 GPM, 50 GPM, 100 GPM, 150 GPM, 200 GPM, 250 GPM, 300 GPM, 400 GPM, 450 GPM, 500 GPM, 750 GPM, 1000 GPM, 1250 GPM, 1500 GPM, 2000 GPM, 2500 GPM, 3000 GPM, 3500 GPM, 4000 GPM, 4500 GPM, 5000 GPM
DN Inlet Flange 2″ (50mm), 3″ (80mm), 3/4″ (20mm), 4″ (100mm), 6″ (150mm), 8″ (200mm), 1 1/4″ (32mm), 1 1/2″ (40mm), 2 1/2″ (65mm)
DN Outlet Flange 1 1/2″ (40mm), 1″ (25mm), 10″ (250mm), 12″ (300mm), 14″ (350mm), 2 1/2″ (65mm), 2″ (50mm), 3 1/2″ (90mm), 5″ (125mm), 6″ (150mm), 8″ (200mm)
Flange Face (RF/FF) FF (flat face), RF (raised face)
Flange standard ANSI B16.5
Installation Horizontal only
Connection type Flanged
Manufacturer Germek
UL Listed No
FM Approved No

SKU: 134. Categories: , , , , , , . Tags: , , , .